Snow plow TSP02 for tractor

Snow plow TSP02 for tractor

The new snow plow TSP02 combines the best features of the two previous generation snow plows of TSP03 (cylindrical) and TSK03 (conical). Plows are suitable for working at city streets, light traffic roads, parks and smaller side roads. Thanks to the wider range of extra equipment, the new TSP02 can now be assembled according to the customer’s wishes, either cylindrical, conical or both sides double throwing, model Twincone.

Images

New TSP3703 snow plough

  • New TSP3703 snow plough
  • New TSP02 snow plough Twincone
  • TSP02 tractor snow plough Twincone

Description

The new snow plow TSP02 is a heavy-duty plow, moldboard partially made of plastic for the tractor. Plows are suitable for working at city streets and light traffic roads, parks and smaller side roads.

The new standard-length of blade holders are equipped with impact-relief protection and thanks to the adjustable cutting blade angles (aggressive, 90 ° and passive), steel and rubber blades can be used on the snow plow. Adjustable impact-relief tension and the turning angle of blade holders in the front of the plow, reduce the snow plow bounce when an obstacle is encountered.

Thanks to the wider range of extra equipment, the new TSP02 can now be assembled according to the customer’s wishes, either cylindrical, conical or both sides double throwing moldboard, model Twincone (TC). Optional equipment also includes boltable fixed corner blades, adjustable skid shoes or support wheels are available. Boltable corner blades allow the cleaning of the curbstones of the road and the support of the snow plow against a curbstone.

We are currently offering the following products: TSP3702 and TSP4002.

Main advatanges of Meiren new TSP02 snow plow

Main advantages of the new TSP02 snow plow:

  • New simple moldboard design
  • Moldboard assembled either cylindrical, conical or both sides double throwing, model Twincone.
  • Adjustable cutting blade angle
  • Support wheels and boltable fixed corner blades as an extra equipment
  • Technical specificationsTSP3702TSP4002
    Width of blades (depends on the turning angle):2 890 - 3 670 mm3 130 - 3 980 mm
    The cutting angle of blades in relation to the ground surface (steel blades):adjustable (15° ... 0° ... -10°)adjustable (15° ... 0° ... -10°)
    Number of segments:4x 915 mm3x 915 mm + 2x 610 mm
    Moldboards height left/right (blades included):1 050/ 1 320 mm1 025/ 1 320 mm
    Max turning angle left/right:30°/ 38°30°/ 38°
    Weight with standard equipment:820 kg880 kg
  • Equipment

    • Moldboard partially made of plastic
    • Standard moldboard (lightly conical)
    • Pivot cylinder
    • Torsion frame
    • Support leg
    • Hydraulic hoses and quick connection 1/2“ “male”
    • Blade holders with standard-length ( 610 mm and/or 915 mm)
    • Blade holders with impact relief protection (the turning angle is in the front of the plow, to prevent the plow bounce )
    • Adjustable cutting angle of blades (aggressive / 90° / passive) and manual adjustable option
    • Adjustable tension of the spring sections (regardless of the cutting angle)
    • Mounting details according to the type of tractor
    • Safety markings (reflector films on the front and rear of the plow)
    • High wear-resistant polyurethane paint, Meiren yellow
  • Extra equipment

    • Parallelogram ( lifting frame)
    • Lower moldboard (cylindrical)
    • Both sides double throwing moldboard, model Twincone.
    • Rubber visor
    • Set of impact relief protection for pivot cylinder (safety valve + hydraulic battery)
    • Electrical hydraulic distributor with safety valves
    • Electrical hydraulic distributor (possible with parallelogram)
    • Switch for hydraulic distributor (in the cabin)
    • Skid shoe holders (2 pcs)
    • Skid shoes STEEL, VAUTID or SANDVIK (2 pcs)
    • Adjustable support wheels (2 pcs)
    • Fixed corner blades (boltable)
    • LED marker lights (with 7-pin plug)
    • Steel, rubber or rubber Hardox blades

Request A Quote

Sidebar navigation

Kristo Kallasmaa

Sales and Marketing Manager

Mob:
+372 56 93 46 81
E-Mail:
Kristo.Kallasmaa@meiren.ee